等比例生成缩略图的php教程程序
这个程序很实现,但只是用来进来等比例生成缩略图哦,你要把文件上传到服务器,然后再由此函数来操作,有需要的朋友参考一下。
function reSizeImg($imgSrc, $resize_width, $resize_height, $isCut=false) {
//图片的类型
$type = substr ( strrchr ( $imgSrc, "." ), 1 );
//初始化图象
if ($type == "jpg") {
$im = imagecreatefromjpeg ( $imgSrc );
}
if ($type == "gif") {
$im = imagecreatefromgif ( $imgSrc );
}
if ($type == "png") {
$im = imagecreatefrompng ( $imgSrc );
}
//目标图象地址
$full_length = strlen ( $imgSrc );
$type_length = strlen ( $type );
$name_length = $full_length - $type_length;
$name = substr ( $imgSrc, 0, $name_length - 1 );
$dstimg = $name . "_s." . $type;$width = imagesx ( $im );
$height = imagesy ( $im );//生成图象
//改变后的图象的比例
$resize_ratio = ($resize_width) / ($resize_height);
//实际图象的比例
$ratio = ($width) / ($height);
if (($isCut) == 1) //裁图
{
if ($ratio >= $resize_ratio) //高度优先
{
$newimg = imagecreatetruecolor ( $resize_width, $resize_height );
imagecopyresampled ( $newimg, $im, 0, 0, 0, 0, $resize_width, $resize_height, (($height) * $resize_ratio), $height );
ImageJpeg ( $newimg, $dstimg );
}
if ($ratio < $resize_ratio) //宽度优先
{
$newimg = imagecreatetruecolor ( $resize_width, $resize_height );
imagecopyresampled ( $newimg, $im, 0, 0, 0, 0, $resize_width, $resize_height, $width, (($width) / $resize_ratio) );
ImageJpeg ( $newimg, $dstimg );
}
} else //不裁图
{
if ($ratio >= $resize_ratio) {
$newimg = imagecreatetruecolor ( $resize_width, ($resize_width) / $ratio );
imagecopyresampled ( $newimg, $im, 0, 0, 0, 0, $resize_width, ($resize_width) / $ratio, $width, $height );
ImageJpeg ( $newimg, $dstimg );
}
if ($ratio < $resize_ratio) {
$newimg = imagecreatetruecolor ( ($resize_height) * $ratio, $resize_height );
imagecopyresampled ( $newimg, $im, 0, 0, 0, 0, ($resize_height) * $ratio, $resize_height, $width, $height );
ImageJpeg ( $newimg, $dstimg );
}
}
ImageDestroy ( $im );
}
调用方法简单,直接reSizeImg就可以了,参考很简单。
<?php
$datay=array(); //纵坐标数据
$datax=array(); //横坐标数据
foreach ($usernums as $key => $value){
$datay[] = $value;
$datax[] = $userids[$key];
}
require_once (‘jpgraph-3.0.7/jpgraph/jpgraph.php’);
require_once (‘jpgraph-3.0.7/jpgraph/jpgraph_bar.php’);
// Create the graph. These two calls are always required
$graph = new Graph(800,600); //图像高宽
$graph->SetScale(“textlin”);
$graph->xaxis->SetTickLabels($datax);
$graph->xaxis->SetFont(FF_VERDANA,FS_NORMAL,10);
$graph->xaxis->SetLabelAngle(30);
$graph->yaxis->scale->SetGrace(20);
$graph->xaxis->scale->SetGrace(20);
// Add a drop shadow
$graph->SetShadow();
// Adjust the margin a bit to make more room for titles
$graph->img->SetMargin(40,30,20,40);
// Create a bar pot
$bplot = new BarPlot($datay);
// Adjust fill color
$bplot->SetFillColor(‘orange’);
$bplot->value->Show();
$bplot->value->SetFont(FF_ARIAL,FS_BOLD,10);
$bplot->value->SetAngle(45);
$bplot->value->SetFormat(‘%d’);
$graph->Add($bplot);
// Setup the titles
$graph->title->Set(iconv(“UTF-8″, “gb2312″,”用户消费报表图”));
$graph->xaxis->title->Set(iconv(“UTF-8″, “gb2312″,”用户姓名”));
$graph->yaxis->title->Set(iconv(“UTF-8″, “gb2312″,”用户订单数量”));
$graph->xaxis->title->SetFont(FF_SIMSUN,FS_BOLD);
$graph->yaxis->title->SetFont(FF_SIMSUN,FS_BOLD);
$graph->title->SetFont(FF_SIMSUN,FS_BOLD);
// Display the graph
$graph->Stroke();
?>
验证码在php教程中是经常会用到了,下面我们为你提供了一些关于php验证码生成类与程序,直接复制下去就可以直接用的哦,下面看代码。
<?php
session_start();
Header("Content-type: image/gif");
class SecurityCode
{
private $codes = '';
function __construct()
{
$code = '0-1-2-3-4-5-6-7-8-9-A-B-C-D-E-F-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z';
$codeArray = explode('-',$code);
shuffle($codeArray);
$this->codes = implode('',array_slice($codeArray,0,4));
}
public function CreateImg()
{
$_SESSION['check_pic'] = $this->codes;
$img = imagecreate(70,25);
imagecolorallocate($img,222,222,222);
$testcolor1 = imagecolorallocate($img,255,0,0);
$testcolor2 = imagecolorallocate($img,51,51,51);
$testcolor3 = imagecolorallocate($img,0,0,255);
$testcolor4 = imagecolorallocate($img,255,0,255);
for ($i = 0; $i < 4; $i++)
{
imagestring($img,rand(5,6),8 + $i * 15,rand(2,8),$this->codes[$i],rand(1,4));
}
imagegif($img);
}
}
$code = new SecurityCode();
$code->CreateImg();
$code = NULL;
?>
代码二
<?
session_start();
for($i=0; $i<4; $i++){
$rand.= dechex(rand(1,15));
}
$_SESSION[check_pic]=$rand;
//echo $_SESSION[check_pic];
// 设置图片大小">图片大小
$im = imagecreatetruecolor(100,30);
// 设置颜色
$bg=imagecolorallocate($im,0,0,0);
$te=imagecolorallocate($im,255,255,255);
// 把字符串写在图像左上角
imagestring($im,rand(5,6),rand(25,30),5,$rand,$te);
// 输出图像
header("Content-type:image/jpeg");
imagejpeg($im);
?>
<?
$handle = opendir('./'); //当前目录
while (false !== ($file = readdir($handle))) { //遍历该php教程文件所在目录
list($filesname,$kzm)=explode(".",$file);//获取扩展名
if ($kzm=="gif" or $kzm=="jpg") { //文件过滤
if (!is_dir('./'.$file)) { //文件夹过滤
$array[]=$file;//把符合条件的文件名存入数组
}
}
}
$suiji=array_rand($array); //使用array_rand函数从数组中随机抽出一个单元
?>
<img" width=100% src="<?=$array[$suiji]?>">
实例二
<?php
/**********************************************
* Filename : img.php
* Author : freemouse
* web : www.111cn.net * email :freemouse1981@gmail.com
* Date : 2010/12/27
* Usage:
* <img" width=100% src=img.php>
* <img" width=100% src=img.php?folder=images2/>
***********************************************/
if($_GET['folder']){
$folder=$_GET['folder'];
}else{
$folder='/images/';
}
//存放图片文件的位置
$path = $_SERVER['DOCUMENT_ROOT']."/".$folder;
$files=array();
if ($handle=opendir("$path")) {
while(false !== ($file = readdir($handle))) {
if ($file != "." && $file != "..") {
if(substr($file,-3)=='gif' || substr($file,-3)=='jpg') $files[count($files)] = $file;
}
}
}
closedir($handle);$random=rand(0,count($files)-1);
if(substr($files[$random],-3)=='gif') header("Content-type: image/gif");
elseif(substr($files[$random],-3)=='jpg') header("Content-type: image/jpeg");
readfile("$path/$files[$random]");
?>
readrand.php(此程序实际上是生成一句网页特效语言)
<?
$arrayall=file("tp.txt");读出tp.txt内容到数组
$arrays=count($arrayall);
if ($arrays==1){//because rand(0,0) is wrong
$selectrand=0;
}else{
srand((double)microtime()*1000000);//设定随机数种子
$selectrand=rand(0,$arrays-1);
}
$exstr=explode(chr(9),$arrayall[$selectrand]);//从全部中随机取出一个并分割
?>
document.write('<a href="<? echo $exstr[1];?>" target="new"><img" width=100% src="<? echo $exstr[2];?>" width="200" height="50" alt="<? echo $exstr[0];?>" ></a>');
HTML文件
<html>
<body>
<script language='javascript'" width=100% src='readrand.php'>
</script>
</body>
</html>
(你可以把scripty放到你需要的位置,并可以加入setTimeout()函数以实现定时刷新)
随机广告代码
<?php
#########随机广告显示##########
function myads(){
$dir="ads"; #设置存放记录的目录
//$dir="ads"; #设置存放记录的目录
$ads="$dir/ads.txt"; #设置广告代码文件
$log ="$dir/ads.log"; #设置ip记录文件
$ads_lines=file($ads);
$lines=count($ads_lines);#文件总行数
####读出广告总数$ads_count和显示次数到数组$display_array########
$ads_count=0;
$display_count=0;
for ($i=0;$i<$lines;$i++){
if((!strcmp(substr($ads_lines[$i],0,7),"display"))){
$ads_count+=1;
$display_array[$ads_count]=substr($ads_lines[$i],8);
$display_count+=$display_array[$ads_count];
}
}
####决定随机显示序号$display_rand#####
srand((double)microtime()*1000000);
$display_rand = rand(1,$display_count);
###决定广告序号$ads_num######
$pricount=0;
$ads_num=1;
for($i=1; $i<=$ads_count; $i++) {
$pricount += $display_array[$i];
if ($display_rand<=$pricount) {$ads_num=$i;break;}
}
#####播放广告########
$num=0;
$flag=0;
for($i=0;$i<$lines;$i++){
if((!strcmp(substr($ads_lines[$i],0,7),"display"))){$num++;}
if(($num==$ads_num)and($flag==0)){$flag=1;continue;}
if(($flag==1)and strcmp($ads_lines[$i][0],"#")){echo $ads_lines[$i];continue;}
if(($flag==1)and(!(strcmp($ads_lines[$i][0],"#")))){break;}
}
####纪录广告显示次数#########
$fp=fopen($log,"a");
fputs($fp,date( "Y-m-d H:i:s " ).getenv("REMOTE_ADDR")."==>".$ads_num."n");
fclose($fp);
}
?>
广告代码文件ads.txt
以下为引用的内容:
########每个广告代码之间用'#'隔开,display为显示加权数,越大显示次数越多######
display=10
<a href="广告1连接地址">
<img" width=100% src=/images/banner/webjxcomad1.gif" alt="广告1"> </a>
################################
display=10
<a href="广告2连接地址" target=_blank>
<img" width=100% src=images/banner/webjxcomad2.gif" width="468" height="60" alt="广告2" border="0"></a>
1. 从中我们可以看到imagecreatetruecolor函数的作用明显地是创建一幅黑色的背景图片,它的第一个参数为所创建图片的宽,第二个参数为所创建图片的高,我们把这个函数的返回值(图像标识符)存入变量里面。
2.imagecreatefromjpeg作用就是将要进行分割的图片读到内存里面(这里大家可能有纪疑问:我直接从硬微盘里读不就得了,为什么还要先读到内存里呢?打个不恰当的比方,大家平时在用钱的时相信大家不会口袋里不会放太多,一般到用的时候才从银行里面取,这里也是一样,这张图片不用它的时候我把它放在硬盘里面,当要对这张图片进行分割或其它操作时就把它读到内存里面,说白了,内存给程序提供了一个运行的舞台)
3.再看imagecopyresampled函数它的作用是将原图片分割好,然后将它和采样拷贝(我理解为投影)到用imagecreatefromjpeg创建好的背景图片上。
<?php教程
// The file
$filename = 'temp/Sunset.jpg';
$percent = 0.5;
// Content type
header('Content-type: image/jpeg');
// Get new dimensions
list($width, $height) = getimagesize($filename);
$new_width = $width * $percent;
$new_height = $height * $percent;//以原图片的长宽的0.5为新的长宽来创建新的图片此图片的标志为$image_p
$image_p = imagecreatetruecolor($new_width, $new_height);
//从 JPEG文件或URL新建一图像
$image = imagecreatefromjpeg($filename);
//将原始图片从坐标(100,100)开始分割,分割的长度(400),高度为(300)原图片的一半,将分割好的图片放在从坐标(0,0)开始的已建好的区域里
imagecopyresampled($image_p, $image, 0, 0, 100, 100, $new_width, $new_height, 400, 300);// Output
imagejpeg($image_p, null, 100);//quality为图片输出的质量范围从 0(最差质量,文件更小)到 100(最佳质量,文件最大)。
?>
上面的例子是把$image图片从坐标(100,100)进行分割,分割后的宽为400,高为300,然后再将此图片从坐标(0,0)处开始投影到图片$image_p上,,投影的宽为$new_width,高为$new_height。
<?php
// 文件及缩放尺寸
//$imgfile = 'smp.jpg';
//$percent = 0.2;
header('Content-type: image/jpeg');
list($width, $height) = getimagesize($imgfile);
$newwidth = $width * $percent;
$newheight = $height * $percent;
$thumb = ImageCreateTrueColor($newwidth,$newheight);
$source = imagecreatefromjpeg($imgfile);
imagecopyresized($thumb, $source, 0, 0, 0, 0, $newwidth, $newheight, $width, $height);
imagejpeg($thumb);
?>更详细教程
<?php
/*构造函数-生成缩略图+水印,参数说明:
$srcFile-图片文件名,
$dstFile-另存文件名,
$markwords-水印文字,
$markimage-水印图片,
$dstW-图片保存宽度,
$dstH-图片保存高度,
$rate-图片保存品质*/
makethumb("a.jpg","b.jpg","50","50");
function makethumb($srcFile,$dstFile,$dstW,$dstH,$rate=100,$markwords=null,$markimage=null)
{
$data = GetImageSize($srcFile);
switch($data[2])
{
case 1:
$im=@ImageCreateFromGIF($srcFile);
break;
case 2:
$im=@ImageCreateFromJPEG($srcFile);
break;
case 3:
$im=@ImageCreateFromPNG($srcFile);
break;
}
if(!$im) return False;
$srcW=ImageSX($im);
$srcH=ImageSY($im);
$dstX=0;
$dstY=0;
if ($srcW*$dstH>$srcH*$dstW)
{
$fdstH = round($srcH*$dstW/$srcW);
$dstY = floor(($dstH-$fdstH)/2);
$fdstW = $dstW;
}
else
{
$fdstW = round($srcW*$dstH/$srcH);
$dstX = floor(($dstW-$fdstW)/2);
$fdstH = $dstH;
}
$ni=ImageCreateTrueColor($dstW,$dstH);
$dstX=($dstX<0)?0:$dstX;
$dstY=($dstX<0)?0:$dstY;
$dstX=($dstX>($dstW/2))?floor($dstW/2):$dstX;
$dstY=($dstY>($dstH/2))?floor($dstH/s):$dstY;
$white = ImageColorAllocate($ni,255,255,255);
$black = ImageColorAllocate($ni,0,0,0);
imagefilledrectangle($ni,0,0,$dstW,$dstH,$white);// 填充背景色
ImageCopyResized($ni,$im,$dstX,$dstY,0,0,$fdstW,$fdstH,$srcW,$srcH);
if($markwords!=null)
{
$markwords=iconv("gb2312","UTF-8",$markwords);
//转换文字编码
ImageTTFText($ni,20,30,450,560,$black,"simhei.ttf",$markwords); //写入文字水印
//参数依次为,文字大小|偏转度|横坐标|纵坐标|文字颜色|文字类型|文字内容
}
elseif($markimage!=null)
{
$wimage_data = GetImageSize($markimage);
switch($wimage_data[2])
{
case 1:
$wimage=@ImageCreateFromGIF($markimage);
break;
case 2:
$wimage=@ImageCreateFromJPEG($markimage);
break;
case 3:
$wimage=@ImageCreateFromPNG($markimage);
break;
}
imagecopy($ni,$wimage,500,560,0,0,88,31); //写入图片水印,水印图片大小">图片大小默认为88*31
imagedestroy($wimage);
}
ImageJpeg($ni,$dstFile,$rate);
ImageJpeg($ni,$srcFile,$rate);
imagedestroy($im);
imagedestroy($ni);
}
?>
实例四
$thumbnail = new ImageResize();
$thumbnail->resizeimage(源图片完整路径, 缩略图宽度, 缩略图高度, 是否剪裁(0或者1), 新图片完整路径);
class ImageResize {
//图片类型
var $type;
//实际宽度
var $width;
//实际高度
var $height;
//改变后的宽度
var $resize_width;
//改变后的高度
var $resize_height;
//是否裁图
var $cut;
//源图象
var $srcimg;
//目标图象地址
var $dstimg;
//临时创建的图象
var $im;function resizeimage($img, $wid, $hei,$c,$dstpath) {
$this->srcimg = $img;
$this->resize_width = $wid;
$this->resize_height = $hei;
$this->cut = $c;
//图片的类型
$this->type = strtolower(substr(strrchr($this->srcimg,"."),1));
//初始化图象
$this->initi_img();
//目标图象地址
$this -> dst_img($dstpath);
//--
$this->width = imagesx($this->im);
$this->height = imagesy($this->im);
//生成图象
$this->newimg();
ImageDestroy ($this->im);
}function newimg() {
//改变后的图象的比例
$resize_ratio = ($this->resize_width)/($this->resize_height);//实际图象的比例
$ratio = ($this->width)/($this->height);if(($this->cut)=="1") {
//裁图 高度优先
if($ratio>=$resize_ratio){
$newimg = imagecreatetruecolor($this->resize_width,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width,$this->resize_height, (($this->height)*$resize_ratio), $this->height);
ImageJpeg ($newimg,$this->dstimg);
}
//裁图 宽度优先
if($ratio<$resize_ratio) {
$newimg = imagecreatetruecolor($this->resize_width,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width, $this->resize_height, $this->width, (($this->width)/$resize_ratio));
ImageJpeg ($newimg,$this->dstimg);
}
} else {
//不裁图
if($ratio>=$resize_ratio) {
$newimg = imagecreatetruecolor($this->resize_width,($this->resize_width)/$ratio);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width, ($this->resize_width)/$ratio, $this->width, $this->height);
ImageJpeg ($newimg,$this->dstimg);
}
if($ratio<$resize_ratio) {
$newimg = imagecreatetruecolor(($this->resize_height)*$ratio,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, ($this->resize_height)*$ratio, $this->resize_height, $this->width, $this->height);
ImageJpeg ($newimg,$this->dstimg);
}
}
}//初始化图象
function initi_img() {
if($this->type=="jpg") {
$this->im = imagecreatefromjpeg($this->srcimg);
}
if($this->type=="gif") {
$this->im = imagecreatefromgif($this->srcimg);
}
if($this->type=="png") {
$this->im = imagecreatefrompng($this->srcimg);
}
if($this->type=="bmp") {
$this->im = $this->imagecreatefrombmp($this->srcimg);
}
}//图象目标地址
function dst_img($dstpath) {
$full_length = strlen($this->srcimg);
$type_length = strlen($this->type);
$name_length = $full_length-$type_length;
$name = substr($this->srcimg,0,$name_length-1);
$this->dstimg = $dstpath;
//echo $this->dstimg;
}
function ConvertBMP2GD($src, $dest = false) {
if(!($src_f = fopen($src, "rb"))) {
return false;
}
if(!($dest_f = fopen($dest, "wb"))) {
return false;
}
$header = unpack("vtype/Vsize/v2reserved/Voffset", fread($src_f,14));
$info = unpack("Vsize/Vwidth/Vheight/vplanes/vbits/Vcompression/Vimagesize/Vxres/Vyres/Vncolor/Vimportant", fread($src_f, 40));
extract($info);
extract($header);
if($type != 0x4D42) { // signature "BM"
return false;
}
$palette_size = $offset - 54;
$ncolor = $palette_size / 4;
$gd_header = "";
// true-color vs. palette
$gd_header .= ($palette_size == 0) ? "xFFxFE" : "xFFxFF";
$gd_header .= pack("n2", $width, $height);
$gd_header .= ($palette_size == 0) ? "x01" : "x00";
if($palette_size) {
$gd_header .= pack("n", $ncolor);
}
// no transparency
$gd_header .= "xFFxFFxFFxFF";fwrite($dest_f, $gd_header);
if($palette_size) {
$palette = fread($src_f, $palette_size);
$gd_palette = "";
$j = 0;
while($j < $palette_size) {
$b = $palette{$j++};
$g = $palette{$j++};
$r = $palette{$j++};
$a = $palette{$j++};
$gd_palette .= "$r$g$b$a";
}
$gd_palette .= str_repeat("x00x00x00x00", 256 - $ncolor);
fwrite($dest_f, $gd_palette);
}$scan_line_size = (($bits * $width) + 7) >> 3;
$scan_line_align = ($scan_line_size & 0x03) ? 4 - ($scan_line_size &
0x03) : 0;for($i = 0, $l = $height - 1; $i < $height; $i++, $l--) {
// BMP stores scan lines starting from bottom
fseek($src_f, $offset + (($scan_line_size + $scan_line_align) * $l));
$scan_line = fread($src_f, $scan_line_size);
if($bits == 24) {
$gd_scan_line = "";
$j = 0;
while($j < $scan_line_size) {
$b = $scan_line{$j++};
$g = $scan_line{$j++};
$r = $scan_line{$j++};
$gd_scan_line .= "x00$r$g$b";
}
}
else if($bits == 8) {
$gd_scan_line = $scan_line;
}
else if($bits == 4) {
$gd_scan_line = "";
$j = 0;
while($j < $scan_line_size) {
$byte = ord($scan_line{$j++});
$p1 = chr($byte >> 4);
$p2 = chr($byte & 0x0F);
$gd_scan_line .= "$p1$p2";
}
$gd_scan_line = substr($gd_scan_line, 0, $width);
}
else if($bits == 1) {
$gd_scan_line = "";
$j = 0;
while($j < $scan_line_size) {
$byte = ord($scan_line{$j++});
$p1 = chr((int) (($byte & 0x80) != 0));
$p2 = chr((int) (($byte & 0x40) != 0));
$p3 = chr((int) (($byte & 0x20) != 0));
$p4 = chr((int) (($byte & 0x10) != 0));
$p5 = chr((int) (($byte & 0x08) != 0));
$p6 = chr((int) (($byte & 0x04) != 0));
$p7 = chr((int) (($byte & 0x02) != 0));
$p8 = chr((int) (($byte & 0x01) != 0));
$gd_scan_line .= "$p1$p2$p3$p4$p5$p6$p7$p8";
}
$gd_scan_line = substr($gd_scan_line, 0, $width);
}
fwrite($dest_f, $gd_scan_line);
}
fclose($src_f);
fclose($dest_f);
return true;
}function imagecreatefrombmp($filename) {
$tmp_name = tempnam("/tmp", "GD");
if($this->ConvertBMP2GD($filename, $tmp_name)) {
$img = imagecreatefromgd($tmp_name);
unlink($tmp_name);
return $img;
}
return false;
}
}